Advertisement
Quick Links
A v a y a
M o d u l a r M e s s a g i n g
With Inband integration,
one pathway between the
PBX and the Avaya
Message Application Server
transmits both call
information and voice
communications
MAS requirements
PBX hardware requirements
Configuration Note 88015
AVAYA Merlin Legend/Magix
AVAYA MERLIN LEGEND
Minimum Software
1.0 METHOD OF INTEGRATION
With Inband integration, one pathway between the Avaya Merlin Legend™ and the
Avaya Message Application Server (MAS) transmits both call information and
voice communications. The pathway is provided by 2-wire analog single-line
circuits that connect to Dialogic cards in the MAS. Each Dialogic port simulates 2-
wire analog lines. Calls to the MAS ports are preceded by the called party
information from the PBX in DTMF format. The MAS then answers and plays the
appropriate greeting. Message-Waiting indication is set and canceled using DTMF
commands over the same pathway.
2.0 AVAYA MESSAGE APPLICATION SERVER REQUIREMENTS
• Dialogic D/41JCT-LS or D/120JCT-LS cards (4 and 12 port/cards)
• Supported Releases: 1.1, 2.0, 3.x, 4.0, 5.x
3.0 PBX HARDWARE REQUIREMENTS
• Station appearances, one per MAS port
• Analog Interface Card (012 or 016 card port).
• A ring generator unit (Pec Code 61388A) is required to provide ring voltage
to the MAS ports if using 012 SLT cards, model 517 A13 through 517 F13
• CPU at Release 2 or higher
Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA Inc. experience configuring its systems. These
notes cannot anticipate every configuration possibility given the inherent variations in all hardware and software products. Please
understand that you may experience a problem not detailed in a Configuration Note. If so, please notify the Technical Assistance
Center at (800) 876-2835, and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or
omissions contained herein.
– Version K (7/09)
Message Waiting
Automated Attendant
Multiple Return to Operator
Call ID
R2V1
Message
Application
Server
Minimum Software
See section 2.0
Advertisement
Related Manuals for Avaya Merlin Legend
Summary of Contents for Avaya Merlin Legend
- Page 1 Configuration Note. If so, please notify the Technical Assistance Center at (800) 876-2835, and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or...
- Page 2 All Calls Ring/no answer Busy Busy/No Answer Station Forward to Personal Greeting All Calls Ring/no answer Busy Busy/No Answer Auto Attendant Call Me Direct Call The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 3 Therefore, choose an appropriate time for this procedure. • From the System Programming menu, select System. • From the System menu, select Mode. The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 4 • Enter an extension number to be assigned to the calling group. Then press enter to save your entry. This number will be the MAS System Access Number. The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 5 • At the next screen, select Integ VMI. Press enter to save your selection. • To return to the Extensions menu, press exit twice. The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 6 To assign trunks to be screen, choose Group Calling. answered directly by the MAS, perform the following • At the Group Calling menu, select Line/Pool. programming The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 7 6. Pause before Digits (ms) = 100 7. Pause Interval for Comma in Dial String (ms) = 2000 8. DTMF Inter-Digit Delay during Dialing (ms) = 80 The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 8 2. Click on Inband to set as the Integration Type 3. Access the Inband tab 4. Maximum Inter-digit Gap (ms) = 500 5. Pause before Inband Digits (ms) = 2000 The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 9 After making these changes, return to “Configuring the voicemail system” within the Message Application Server Installation Guide. Ensure you are prompted to restart the Message Application Server services to apply these changes. The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
- Page 10 Internal callers will receive busy tone when dialing a station in do-not-disturb and will not follow call coverage programming. Release 2 software will allow all-calls forwarding to the voice-processing module. The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1...
-
Page 11: Change History
Version K 07/09 ©2009 AVAYA Inc. All rights reserved. All trademarks identified by the ®, SM and TM are registered trademarks, servicemarks or trademarks respectively. All other trademarks are properties of their respective owners. The above information is based on knowledge available at the time of publication and is subject to change without notice. Printed in U.S.A.