Chicago Electric 95189 Operating Instructions Manual page 15

3. Before the first use, remove the Fuel Tank Cap (33B
with unleaded gasoline. Then, replace the Fuel Tank Cap. If necessary, refill the
Fuel Tank with unleaded gasoline. (See Figure c.)
To Start The Engine:
1. Make sure the electrical powered tools/equipment that will be used is not plugged
in to the Generator.
2. Turn the 115 volt AC Circuit Breaker (5) to its "
3. Open the Fuel Valve (40B).
4. Move the Choke Lever (116C) to the CLOSED position to start a cold engine.
Leave the Choke Lever (116C) in the open position to restart a warm engine.
(See Figure E.)
SKU 95189 For technical questions, please call 1-800-444-3353.
ON" position. (See Figure D.)
(See Figure E.)
) and fill the Fuel Tank (30B
1
)
1
REV 09a
Page 15