Command Quick Reference; Command Set For Ppla - AMT Datasouth Fastmark 6000 Series User Manual

COMMAND QUICK REFERENCE

This section lists all software commands of the printer. For more information please refer to
the Programmer's Manual.

Command Set for PPLA

The following commands are for Printer Programming Language A.
Note: In this quick reference all variable data is represented in Italics.
System Setting Commands
These commands will cause the related parameters to be saved in the non-volatile memory,
E2PROM. The parameters will be stored unless they are changed by another command,
or reset from the panel.
Command
<STX>KI4n
<STX>KI7n
<STX>KI8n
<STX>KI;n
<STX>KXnnnn
<STX>KI<m
Fastmark 6000 Series
Description
Media empty check
Set ribbon mode
Set baud rate
Control Code types
Set continuous label
length
Set symbol set for ASD
smooth font set
Parameter
n : '0' - disable,
'1' - enable.
n : '0' – DT,
'1' – TT.
n : '0' – 9600,
'1' – 600,
'2' – 2400,
'3' – 19200,
'4' – 4800,
'5' – 38400,
'6' – 1200,
'7' – 9600.
n : '0' - selects standard control
codes.
'1' - Select alternate control
codes
nnnn : a 4-digit number, in mm
m : '0' - USASCII,
'1' - United Kingdom,
'2' - Spanish,
'3' - Swedish,
'4' - French,
'5' - German,
'6' - Italian,
'7' - Danish/Norwegian.
Factory default
Enabled
TT with ribbon
9600 baud.
0 for USASCII
User's Guide 47