3. Rotate the Green Printhead latch counter-clockwise to open the printhead module.
4. Rotate the Side Access Door down to allow the ribbon to be loaded under the printhead
module. This will allow you to slide the ribbon under the printhead without having to
thread it under the module.
Printhead Latch
Figure 11 - Printhead Latch and Side Access Cover
5. Unwrap the ribbon and place the Ribbon Supply Roll on the Ribbon Supply Spindle
located towards back of printer.
Fastmark 6000 Series
Figure 12 - Ribbon Supply
Side Access Latch
Ribbon Supply
User's Guide
17