AMT Datasouth Fastmark 6000 Series User Manual page 2

n
This label printer complies with the requirements in Part 15 of FCC rules for a Class A
computing device. Operation of this equipment in a residential area may cause
unacceptable interface to radio and TV reception, requiring the operator to take whatever
steps are necessary to correct the interference.
n
Place the printer on a flat, firm and solid surface.
n
Do not place the printer near a heat source or near water.
n
Refer to the specification label on the bottom of this printer and ensure that your power
source exactly meets these requirements.
n
Do not open the printer during operation to avoid electrical shock.
n
Do not attempt to disassemble this printer if it malfunctions.
n
All rights are reserved. No part of this document may be reproduced or issued to third
parties in any form without the permission of AMT Datasouth.
n
The material in this document is provided for general information and is subject to change
without notice.
PCL is a registered trademark of Hewlett-Packard Company
Windows, MS-Word and MS-DOS are registered trademarks of Microsoft Corporation
PC is a registered trademark of International Business Machines
Centronics is a registered trademark of Centronics Corporation
CodeSoft is a registered trademark of Techniques Avancees
BarTender is a registered trademark of Seagull Scientific Systems, Inc.
LabelView is a registered trademark of Techniques Avancees
LabelMatrix is a registered trademark of StrandWare, Inc
Fastmark 6000 Series
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
TRADEMARK CREDITS
User's Guide 1