LED Indicators
There are three LED indicators on the front panel, "READY", "MEDIA" and
"RIBBON". These indicators display the present status of the printer.
X READY
X MEDIA
X RIBBON
32
User's Guide
The Ready LED indicates the following conditions:
ON
- The printer's powered is on.
Off
- The printer's power is off.
Blinking - Error condition (see Troubleshooting section for
The Media LED indicates the following conditions:
ON
- Media is installed and ready for Normal
operation.
Off
- The printer's power is off.
Blinking - Media Out condition.
This condition only occurs following a media
motion request.
The Ribbon LED indicates the following conditions:
ON
- The printer is set for Thermal Transfer mode
and the printer contains a Thermal Transfer
Ribbon.
OFF
- The printer is set for Direct Thermal Mode.
Blinking - The printer is set for Thermal Transfer mode
and the ribbon is not moving or at end of life.
This condition only occurs following a media
motion request.
details)
Fastmark 6000 Series