AMT Datasouth Fastmark 6000 Series User Manual page 22

5. Slide the Media Supply Guide to the full widest position.
6. Ensure the media is face out with the labels feeding from the top of the roll. If not obtain
correctly wound media from your supplier
7. Place the media roll on the Media Supply Spindle.
8. Slide the roll fully towards the center of the printer.
9. Slide the Media Supply Guide towards the center of the printer until it is snug against
the media.
Fastmark 6000 Series
Media Supply Spindle
Figure 18 – Media Supply
Media Supply Guide
User's Guide 21