Table of Contents
Advertisement
table of zones
When using the diagnostic functions, use the Table of Zones to see which input has triggered the system. It is
also helpful in deciding which input to use when connecting optional sensors and switches.
Zone Number
One
Two
Three
Four
Five
NOTE: The Warn Away
long-term event history
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long-term event
history:
1.
2.
The LED will flash in groups indicating the last two zones that triggered the unit.
NOTE: The Warn Away
34
Trigger Type
Instant
Multiplexed
Two-stage, progresses from
warning to full alarm
Multiplex
Two-stage (similar to doors)
®
response does not report on the LED.
Turn on the ignition.
Press and hold the Valet
®
triggers are not stored to memory.
Input Description
H1/6 BLUE wire. Connect to optional hood/trunk pins
Heavy impact detected by the on-board Doubleguard
shock sensor.
Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
BLUE and GREEN wires of optional sensor plug. Inputs
shorter than 0.8 seconds will trigger a Warn Away
response, while inputs longer than 0.8 seconds will
instantly trigger full alarm sequence.
Ignition input. H1/9 YELLOW.
®
/program switch.
®
© 1999 Directed Electronics, Inc. Vista, CA
®
Advertisement
Chapters
Table of Contents
