Once A Feature Is Programmed; To Access Another Feature; To Exit The Learn Routine; System Features Menu - Auto Mate 435 Installation Manual

once a feature is programmed

I Other features can be programmed.
I The Learn Routine can be exited if programming is complete.

to access another feature

Press and release the Valet
programmed to the next one you want to program. Then press the Valet
For example, if you just programmed the third feature and you would like to program the seventh feature in the
menu, you would: Press and release the Valet
once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.

to exit the learn routine

The learn routine will be exited if any of the following occurs:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the Valet ® /program button too many times.

system features menu

FEATURE NUMBER
1
2
3
4
5
6
7
8
9
10
11
*Default settings indicated in bold.
30
® /Program button the number of times necessary to advance from the feature you just
® /Program button four times. Then press the Valet
ONE-CHIRP SETTING*
Active arming
Audible arm/disarm confirmation on
Ignition-controlled locking on
Ignition-controlled unlocking on
Active locking
0.8 second door lock pulses
Single unlock pulse
Door trigger error chirp on
Ignition-controlled domelight on
Valet switch input: 1 pulse
Channel 3: validity
® /Program button once more and hold it.
TWO-CHIRP SETTING*
Passive Arming
Audible arm/disarm confirmation off
Ignition-controlled locking off
Ignition-controlled unlocking off
Passive locking
3.5 second door lock pulses
Double unlock pulse
Door trigger error chirp off
Ignition-controlled domelight off
Valet switch input: 2-5 pulses
Channel 3: latched/latched, reset with
ignition/30-second timed/second
unlock/delayed accessory output
© 1999 Directed Electronics, Inc. Vista, CA
® /Program button