Harness 2 (H2), Door Lock Outputs - Auto Mate 435 Installation Manual

IMPORTANT! Never use this wire to drive anything but a relay or a low-current input! The transis-
torized output can only supply 200 mA of current. Connecting directly to a solenoid, motor, or other
high-current device will cause it to fail.
harness 2 (H2), (+/-) door lock outputs
______
H2/A
______
H2/B
______
H2/C
This system can control two common power door lock types without any additional parts! With certain vehicles,
or if an actuator is to be installed, either a 451M Door Lock Relay Satellite or two relays will be required.
IMPORTANT! If you mistake a Type C direct-wired system for a Type A positive-pulse system, the
module will be damaged!
© 1999 Directed Electronics, Inc. Vista, CA
GREEN
EMPTY
BLUE
(-) LOCK, (+) UNLOCK OUTPUT
UNLESS USING 451M
(-) UNLOCK, (+) LOCK OUTPUT
19