Show Rmon - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]} (1)
Parameters
rising_alarm - (Optional) Specifies the trap state for rising alarm. The default state is enabled.
enable - Specifies that the rising alarm function will be enabled.
disable - Specifies that the rising alarm function will be disabled.
falling_alarm - (Optional) Specifies the trap state for falling alarm. The default state is enabled.
enable - Specifies that the falling alarm function will be enabled.
disable - Specifies that the falling alarm function will be disabled.
Restrictions
Only Administrators can issue this command.
Example
To configure the trap state for RMON events:
DGS-3000-26TC:admin#config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DGS-3000-26TC:admin#

69-35 show rmon

Description
This command is used to display the RMON related setting.
Format
show rmon
Parameters
None.
Restrictions
None.
Example
To display the RMON related setting:
623