Show Accounting Service - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
shell - Accounting service for shell events: When user logs on or out the Switch (via the console,
Telnet, or SSH) and timeout occurs, accounting information will be collected and sent to
RADIUS server. By default, the service is disabled.
system - Accounting service for system events: reset, reboot. By default, the service is disabled.
state - Specifies the state of the specified service.
enable - Specifies to enable the specified accounting service.
radius_only - (Optional) Specifies accounting service to only use radius group specified by
the config radius add command.
method_list_name - (Optional) Specifies accounting service by the AAA user-defined
method list specified by the "create accounting method_list_name <string 15>"
command.
<string 15> - Enter the method list name.
default_method_list - - (Optional) Specifies accounting service by the AAA default
method list.
disable - Specifies to disable the specified accounting service.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Enable it to configure accounting shell state:
DGS-3000-26TC:admin#config accounting service shell state enable
Command: config accounting service shell state enable
Success.
DGS-3000-26TC:admin#
5-35

show accounting service

Description
This command is used to show the status of RADIUS accounting services.
Format
show accounting service
Parameters
None.
Restrictions
None.
Example
To show information of RADIUS accounting services:
80