Clarion NP401 Owner's Manual & Installation Manual page 66

Flash memory navigation system
Table of Contents

Advertisement

These settings determine how routes will be calculated. Tap the following buttons:
Button
You can set the type of vehicle you will use to navigate the route. Based upon this setting,
Vehicle
some of the road types can be excluded from the route, or some of the restrictions may not
be taken into account in route calculation.
To let the route fit your needs, you can also set which road types are to be considered for or
to be excluded from the route if possible.
Road Types
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your
Used for
destination can only be accessed using some of the excluded road types, they will be used
Route
but only as much as necessary. In this case a warning icon will be shown on the Route
Planning
Information screen, and the part of the route not matching your preference will be displayed
in a different color on the map.
Route
You can choose from different route types. The routing method can be changed temporarily
Calculation
while creating the route: when the destination is selected, tap
Method
menu.
Type
Description
You might need to avoid freeways when you are driving a slow car or you are towing
Freeways
another vehicle.
Unpaved
Clarion Mobile Map excludes unpaved roads by default: unpaved roads can be in a bad
roads
condition and usually you cannot reach the speed limit on them.
By default Clarion Mobile Map includes toll roads (pay roads where there is a per-use charge)
Per-use Toll
in the routes. If you disable toll roads, Clarion Mobile Map plans the best toll-free route.
Period
Charge roads are pay roads where you can purchase a pass or vignette to use the road for
Charge
a longer period of time. They can be enabled or disabled separately from toll roads.
You might need a permit or permission from the owners to use certain roads or to enter
Permit
certain areas.
needed
Clarion Mobile Map excludes these roads from the route calculation by default.
Clarion Mobile Map includes ferries in a planned route by default. However, a map does not
Ferries
necessarily contain information about the accessibility of temporary ferries. You might also
need to pay a fare on ferries.
66
NP401
Description
,
,
.
in the Cursor

Advertisement

Table of Contents
loading

Table of Contents