Using Track Logs - Clarion NP401 Owner's Manual & Installation Manual

The easiest way to delete the upcoming route point
(the next via point) is to open the Route Information
screen by tapping the Turn Preview field (
Map screen, and then tapping
Alternatively, you can do it through the Navigation
, ,
menu:
The easiest way to delete the active route in both
Simple mode and Advanced mode is to open the
Route Information screen by tapping the Turn
Preview field ( ) on the Map screen, and then
tapping .
In Advanced mode, you have another option. Tap
the following buttons:
If via points exist in the active route, you
cannot delete the route immediately on the
Route Information screen. Tap
Note!
repeatedly until all via points disappear
and the
cancel the whole route.

5.11 Using Track Logs

Clarion Mobile Map can record the track (how your
GPS position changed) that you drive.
You do not need to select a
create a for this; you can also record
Tip! route
your driving path while cruising.
This feature is available in Advanced mode only.
40 NP401
) on the
.
, .
, , .
button appears. Tap it to
and
destination
The procedure is explained starting from the Map
screen.
1. Start driving.
2. Tap the following buttons:
3. Start the recording: tap the
4. You return to the map and you can continue
driving.
5. Repeat the above steps, then tap
to stop the recording. Clarion Mobile Map labels
the Track Log with a time stamp.
(As an alternative, you can tap the
Quick menu to start, and later to stop the Track Log
recording.)
1. Tap the following buttons:
2. Locate the desired Track Log, and then tap the
button next to it.
3. The map returns, and the Track Log simulation (a
life-like replay) begins.
4. You can stop the replay any time by tapping the
button.
1. Tap the following buttons:
2. Tap the desired Track Log and then tap one of the
color buttons.
, ,
button.
later
button in the
, , .
, , .