Table of Contents
Advertisement
Button
Elevation on
2D maps can also display 3D information. These top-down maps can display elevation by
2D Map
colors and shading.
Street
Street names and POI icons can be disturbing on the map during navigation. With this
Names
switch you can suppress these map elements when Clarion Mobile Map is following your
During
position on the map. If you move the map, both the street names and POI icons reappear
Navigation
immediately.
Some maps contain lane information to help you position your car in the upcoming
Lane
intersection. This setting tells Clarion Mobile Map whether to display this information at the
Information
top or at the bottom of the map.
When Clarion Mobile Map is working in the background, the map can be displayed on the
Interrupt AV
screen when approaching a maneuver.
You can adjust the sounds of Clarion Mobile Map. Tap the following buttons:
Button
Description
Master
Use the switch to mute all sounds of the device and then to re-enable them again. The
Volume
position of the slider determines the volume level.
Voice
The slider adjusts the loudness of voice prompts. In its leftmost position, the voice guidance
Guidance
is suppressed; in its rightmost position, the master volume applies.
Volume
touch screen.
When driving at high speed, the noise in the car may be too loud to clearly hear the voice
Dynamic
guidance and other sounds. Using Dynamic Volume you can instruct Clarion Mobile Map
Volume
to increase the volume when your speed exceeds a certain minimum, and reach its highest
volume at the given maximum speed.
Trigger Tone A special sound played before voice instructions.
Description
,
,
.
NP401
65
Advertisement
Table of Contents
