Clarion NP401 Owner's Manual & Installation Manual page 33

2. By default, Clarion Mobile Map proposes the
state, and select a different one from the list.
3. If needed, change the city:
a) To select the city from the list of recently used
ones, tap the button.
b) To enter a new city:
.
the city name on the keyboard.
names that match the string appear in a list.
to open the list of results
before it appears automatically.
4. Enter the street name:
a) Tap .
b) Start entering the street name on the
keyboard.
c) Get to the list of results:
names that match the string appear in a list.
to open the list of results
before it appears automatically.
d) Select the street from the list.
5. Tap the
a) If only a few intersecting streets exist, their
list appears immediately.
button.
b) In case of a longer street, a keyboard screen
, appears. Start entering the name of the
intersecting street on the keyboard. As you
type, if the matching streets can be shown on
one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in
the middle. Tap
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
The City Center is not the geometric center of the
city but an arbitrary point the map creators have
chosen. In towns and villages, it is usually the
most important intersection; in larger cities, it is an
important intersection.
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons:
mode), or ,
2. By default, Clarion Mobile Map proposes the
state, and select a different one from the list.
3. If needed, change the city:
a) To select the city from the list of recently used
ones, tap the
b) To enter a new city:
.
(Simple mode) or
(Simple
(Advanced mode).
button.
NP401 33