Table of Contents
Advertisement
the middle. Tap
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
There are long roads where house numbering is
restarted at some point. This way the same house
number can appear twice or even more times on
the same road. If this is the case, after entering the
house number, you need to select the appropriate
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons:
mode), or
,
(Advanced mode).
2. By default, Clarion Mobile Map proposes the
state, and select a different one from the list.
3. If needed, change the city:
ones, tap the
button.
1. Tap the button with the name of the city, or
.
2. Start entering the city name on the keyboard.
3. Get to the list of search results:
names that match the string appear in a list.
(Simple mode) or
4. Enter the street name:
(Simple
5. Enter the house number:
6. A list appears with the matching addresses.
7. The map appears with the selected point in
to open the list of results
before it appears automatically.
4. Select the city from the list.
a) Tap
.
b) Start entering the street name on the
keyboard.
c) Get to the list of results:
names that match the string appear in a list.
to open the list of results
before it appears automatically.
d) Select the street from the list.
a) Tap
.
b) Enter the house number on the keyboard. (To
enter letters, tap
alphabetic keyboard layout. To enter symbols,
tap
).
d) Tap
to finish entering the address.
Tap the desired one.
the middle. Tap
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
and select an
(Simple mode) or
NP401
31
Advertisement
Table of Contents
