Route Information Screen - Clarion NP401 Owner's Manual & Installation Manual

Flash memory navigation system
Table of Contents

Advertisement

The Route Information screen has all the data and
some of the functions you need while you navigate.
There are two ways to open this screen:
tapping the Turn Preview field (
the following buttons:
In the top section of the screen you see information
about the current route. The fields on this screen
are continuously updated while you keep the screen
open.
Name
Description
The upper part of this screen shows your planned route as a
horizontal line. Its leftmost point is the start of the route, the
Route line
rightmost one is the final destination, and you can see your
distance.
Shows the estimated arrival time at the final destination of
Estimated
the route based on information available for the remaining
Arrival
segments of the route. The calculation cannot take into
account traffic jams and other possible delays.
Distance
Shows the distance you need to travel on the route before
Left
reaching your final destination.
Shows the time needed to reach the final destination of
the route based on information available for the remaining
Time Left
segments of the route. The calculation cannot take into
account traffic jams and other possible delays.
This field shows how the route was calculated. It either
Method
displays the Route Calculation Method or the Vehicle field
from the Route Planning options.
52
NP401
).
,
.
When you open the screen, all fields contain
information about reaching your final destination.
Tap any of the fields to see data on the via
points starting from the first one through the final
destination again.
You have the following data and functions on this
screen:
Function
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.

Advertisement

Table of Contents
loading

Table of Contents