Before Using Gps - Olympus TG-2 Instruction Manual

Before Using GPS

The camera's GPS (Global Positioning System)
feature determines your position (latitude and
longitude) and stores this information with pictures
taken with the camera.
The camera uses supplementary orbital data
(assisted GPS or A-GPS) for improved signal
acquisition.
A-GPS data must be updated every 14 days.
Before using GPS, you will need to set the camera
clock to the correct date and time. (p. 49)
Updating A-GPS Data Updating A-GPS Data
1
Install the update software
(OLYMPUS A-GPS Utility).
Download the update software from the
following website and install it on your
computer.
http://sdl.olympus-imaging.com/agps/
The update software can also be installed from
the supplied PC software.
2
Connect the camera to the
computer and launch the update
software.
"Connecting with a computer"
(p. 56)
Once the software has started, follow the
on-screen instructions.
8
Using GPS Using GPS
1
Select [On] for [GPS Settings] >
[GPS] in the d (Settings Menu 3)
tab. (p. 55)
Once the camera has determined the position,
and location coordinates will appear in
the display.
P P
4 4
Blink: Searching GPS signal
Light: Receiving GPS signal
The camera may take a few minutes to determine
position after a period of disuse.
If the icon is still À ashing after several minutes,
the camera is probably having dif¿ culty detecting
a signal. Move to an unobstructed outdoor area or
otherwise change your location.
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
12
M
4:3
N 0:34 0:34
GPS
ORM