Olympus TG-2 Instruction Manual page 28

Aspect Sets the horizontal-to-vertical ratio of images.
u
4:3
v
16:9
Change the horizontal-to-vertical ratio when taking pictures.
w
3:2
x
1:1
In certain shooting modes, some functions cannot be set. Refer to "List of settings available in each shooting
mode" (p. 73).
Examples of image size when the aspect ratio is 4:3.
Registering one touch white balance Registering one touch white balance
Select [ One Touch 1] or [
object, and press the
The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
The registered white balance data will not be cleared by turning off the power.
Perform this procedure under the light where the pictures will be actually taken.
When the camera settings are changed, the white balance must be registered again.
When the white balance cannot be registered, check that the white paper ¿ lls the screen, and then
perform the procedure again.
28
One Touch 2], face the camera toward a piece of white paper or other white
button.