Shooting Still Images - Olympus TG-2 Instruction Manual

Learning how to use the
camera
Press the button to turn on the camera and
enter the standby mode. (Press the
again to turn off the camera.)
Select the shooting mode, and press the shutter
button to shoot a still image.
To shoot a movie, press the R button.
Set the shooting functions using the function
menu or the setup menu.
To view images, press the q button to switch to
playback mode.
To return to standby mode, press the q button
again, or press the shutter button halfway down
and then release it.
Press and hold the q button while the camera is
turned off to start up the camera in the playback
mode.
In this case, pressing the q button again sets
the camera to the standby mode.
10

Shooting still images

1
Press the
the camera.
button
2
Select the shooting mode. (p. 14)
3
Hold the camera and compose the
shot.
When holding the camera, take care not to cover
the À ash, microphone or other important parts
with your ¿ ngers, etc.
Take care so that the À ash window is not
exposed to ¿ ngerprints or dirt.
Press and hold A button to brighten the monitor
when there is dif¿ culty in seeing the monitor. The
monitor brightness returns to the default setting if
no operations are performed for 10 seconds.
button to turn on