Olympus TG-2 Instruction Manual page 32

Selecting the focusing area Selecting the focusing area
z [AF Mode] z
[AF Mode]
Submenu 2
The camera focuses
automatically. (If a face is
detected, it is shown by a white
frame *1 ; when the shutter button is
Face/iESP pressed halfway and the camera
focuses, the frame turns to
*2
green . If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the
Spot subject located within the AF
target mark.
The camera tracks the subject
AF Tracking movement automatically to focus
on it continuously.
*1
For some subjects, the frame may not appear or
may take some time to appear.
*2 If the frame blinks in red, the camera cannot focus.
Try refocusing on the subject.
[AF Tracking] is enabled in the optical zoom area.
32
To focus on a moving subject To focus on a moving subject
continuously (AF Tracking) continuously (AF Tracking)
1 Hold the camera to align the AF target mark on
Application
2 When the camera recognizes the subject, the
3 To cancel the tracking, press the A button.
Depending on the subjects or the shooting
conditions, the camera may be unable to lock the
focus or fail to track the subject movement.
When the camera fails to track the subject
movement, the AF target mark changes to red.
Selecting the method for Selecting the method for
measuring the brightness measuring the brightness
z z [ESP/
ESP
5 (spot)
When set to [ESP], the center may appear dark
when shooting against strong backlighting.
the subject and press the A button.
AF target mark automatically tracks the subject
movement to focus on it continuously.
n ] ]
[ESP/n
Submenu 2 Application
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the
center and surrounding areas of
the screen separately).
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).