Olympus TG-2 Instruction Manual page 51

Displaying the current altitude/water depth (atmospheric/hydraulic Displaying the current altitude/water depth (atmospheric/hydraulic
pressure) d d [Manometer] pressure) [Manometer]
The readings may have a margin of error depending on meteorological conditions. Use the readings only for
your reference.
Submenu 1 Submenu 2
Tough Settings Manometer
When set to [On], a cautionary message appears if the water depth reaches 12 m (39.4 ft), followed by a
warning if the depth exceeds 15 m (49.2 ft).
To adjust the altitude/water depth display To adjust the altitude/water depth display
1 Use FG to select [Calibrate], and press the A button.
2 Use FG to select the current altitude/water depth, and press the A button to set.
Setting the units of elevation, depth, etc. Setting the units of elevation, depth, etc. d d [m/ft]
Submenu 1 Submenu 2
Tough Settings m/ft
Submenu 3
Off Cancels the manometer display.
Displays the current altitude/water depth
(atmospheric/hydraulic pressure) in the
On
shooting standby mode screen. (–20 m to
5,000 m)
Calibrate Proceed to the setting screen. See below.
[m/ft]
Submenu 3
m This displays in meters.
ft This displays in feet.
Application
MENU
Calibrate Back
1200m 1200m
Application
51