Olympus TG-2 Instruction Manual page 46

Submenu 2
This resets the sequential number
for the folder name and ¿ le name
Reset whenever a new card is inserted.
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and ¿ le name
Auto from the previous card. This is
useful for managing all image
folder names and ¿ les names with
sequential numbers.
*1
The number for the folder name is reset to 100,
and the one for the ¿ le name is reset to 0001.
Adjusting the image processing Adjusting the image processing
function function d d [Pixel Mapping] [Pixel Mapping]
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
The check and adjustment of the image
processing function starts.
46
Adjusting the brightness of the Adjusting the brightness of the
Application
monitor d d [ [s monitor
To adjust the monitor brightness To adjust the monitor brightness
*1
1 Use FG to adjust the brightness while viewing
Displaying indicators d d [Info Off]
Displaying indicators
10sec
Hold
Indicators that are always displayed may "burn in"
to the monitor. "Monitor" (p. 99)
s ] ]
the screen, and then press the A button.
s
Submenu 2 Application
Indicators automatically clear from
the display if no operations are
performed for 10 seconds.
Indicators are always displayed
during shooting.
Back MENU
[Info Off]