Advertisement
F
F
IND OUT MORE
IND OUT MORE
.
.
ON THE WEB
ON THE WEB
W W W W W
ILBUR
ILBUR
WILBURCURTIS.COM
ILBUR
ILBUR
ILBUR
WILBURCURTIS.COM
Gemini Digital Brewers – Instructions
Models Included
This appliance is designed for commercial use. Any servicing other than cleaning and maintenance should be performed by an
! GEM-612ILD
authorized Wilbur Curtis service center.
! GEM-600ILD
• Do NOT immerse the unit in water or any other liquid
! TL-9002
• To reduce the risk of fire or electric shock, do NOT open top panel. No user serviceable parts inside. Repair should be done
! TL-9001
only by authorized service personnel.
• Keep hands and other items away from hot parts of unit during operation.
WARNING HOT LIQUID,
• Never clean with scouring powders, bleach or harsh implements.
Scalding may occur.
Conventions
Conventions
Conventions
Conventions
Conventions
Avoid splashing.
W W W W W ARNINGS –
ARNINGS – T T T T T o help a
ARNINGS –
ARNINGS –
ARNINGS –
o help a
o help a
o help avoid personal injur
o help a
CAUTION:
CAUTION:
CAUTION: Please use
CAUTION:
CAUTION:
this setup procedure
before attempting to use
Important Notes/Cautions – from the factory
Important Notes/Cautions – from the factory
Important Notes/Cautions – from the factory
Important Notes/Cautions – from the factory
Important Notes/Cautions – from the factory
this brewer. Failure to follow the
instructions can result in injury or
Sanitation Requirements
Sanitation Requirements
Sanitation Requirements
Sanitation Requirements
Sanitation Requirements
the voiding of the warranty.
Y Y Y Y Y our Curtis
our Curtis ADS System is F
our Curtis
our Curtis
our Curtis
ADS System is F
ADS System is F
ADS System is Factor
ADS System is F
I M P O R
I M P O R
I M P O R
I M P O R
I M P O R T T T T T A N T
A N T
A N T: : : : :
A N T
A N T
Following are the Factory Settings for your interLock Coffee Brewing Systems:
Equipment to be
• Brew
• Brew T T T T T empera
• Brew
• Brew
• Brew
emperature =
empera
empera
empera
ture =
ture =
ture = 200°F
ture =
installed to comply with
• Brew Volume = Set to 36 cup vessel requirements. • Sleep Mode =
• Brew Volume =
• Brew Volume =
• Brew Volume =
• Brew Volume =
applicable federal, state, or local
System Requirements:
plumbing/electrical codes having
jurisdiction.
• Water Source
• Water Source
• Water Source
• Water Source
• Water Source
20 – 90 PSI (Minimum Flow Rate of 1 GPM)
• Electrical:
• Electrical: See attached schematic for standard model or visit www.wilburcurtis.com for your model.
• Electrical:
• Electrical:
• Electrical:
CAUTION:
CAUTION: DO NOT
CAUTION:
CAUTION:
CAUTION:
SETUP STEPS
SETUP STEPS
SETUP STEPS
SETUP STEPS
SETUP STEPS
connect this brewer to
The unit should be level (left to right and front to back), located on a solid counter top. Connect a water line from the water filter
hot water. The inlet valve
to the brewer. NOTE: Some type of water filtration device must be used to maintain a trouble-free operation. (In areas with
is not rated for hot water.
extremely hard water, we suggest that a sedimentary and taste & odor filter be installed.) This will prolong the life of your brewing
system and enhance coffee quality.
The National Sanitation Foundation requires the following water connection:
1. A quick disconnect or additional coiled tubing (at least 2x the depth of the unit) so that the machine can be moved
for cleaning underneath.
2. In some areas an approved backflow prevention device may be required between the brewer and the water supply.
1. A 3/8" NPT x 1/4" Flare elbow has been supplied for water line connection. Use tubing sized sufficiently to provide a
minimum of 1.0 GPM.
2. To hookup the InterLock grinder, Locate the jack labeled "Class 2 Wiring Only" on brewer and grinder. Connect the two with
the cable plug.
3. Connect the unit to an appropriate electrical power circuit.
4. Turn on the toggle (STANDBY/ON) switch behind the unit. The heating tank will start to fill. When the water level in the
tank rises to the correct volume, the heating elements will energize automatically. With ADS Systems there is no danger
of element burnout caused by an empty tank.
5. The heating tank will require 20 to 30 minutes to reach operating temperature (200°F) as indicated by the READY-TO-
BREW indicator.
6. Prior to brewing, dispense 12 ounces of hot water through the hot water faucet.
7. Brew a cycle of at least 12 ounces, to purge the water lines of any air that may be trapped after filling.
WARNING
WARNING
WARNING
WARNING
WARNING TO AVOID
BREWING INSTRUCTIONS
BREWING INSTRUCTIONS
SCALDING, Do not
BREWING INSTRUCTIONS
BREWING INSTRUCTIONS
BREWING INSTRUCTIONS
remove brewcone while
1. Brewer should be ON (Confirm at rear toggle switch, then press the ON/OFF button). Ready-to-Brew should be ON. If
brew light is flashing.
connected to an InterLock grinder, grinder should be on. If Interlocked, grind coffee at this time.
2. Place an empty Satellite on the warmer deck, under the brewcone and press the warmer switch.
C
ISO 9001 REGISTERED
WILBUR CURTIS COMPANY
3. Place a clean filter
4. Fill brewcone with
into the brewcone.
Montebello, CA 90640
FOR THE LATEST SPECIFICATIONS AND INFORMATION GO TO
C C C C C
C C C C C
, I , I , I , I , I
. . . . .
URTIS
URTIS
OMP
OMP
ANY
ANY
NC
NC
URTIS
URTIS
URTIS
OMP
OMP
OMPANY
ANY
ANY
NC
NC
NC
void personal injury y y y y
void personal injur
void personal injur
void personal injur
actor
actor
actory Pre-Set and Read
actor
y Pre-Set and Read
y Pre-Set and Read
y Pre-Set and Read
y Pre-Set and Ready to Go... Right from the Carton.
y to Go... Right from the Carton.
y to Go... Right from the Carton.
y to Go... Right from the Carton.
y to Go... Right from the Carton.
• Water Bypass =
• Water Bypass = On for 36 cup only
• Water Bypass =
• Water Bypass =
• Water Bypass =
• Sleep Mode = Off
• Sleep Mode =
• Sleep Mode =
• Sleep Mode =
5. Transfer filled
6. Press Brew button.
ground coffee.
brewcone to
Brewing will begin
brewer.
immediately.
WWW.WILBURCURTIS.COM
1
Advertisement
