Name Setup; Bright/Contrast Setup - Swann DVR4-Net Installation Manual

Net Search operation: if the software is in net search mode (click
search window will display, it includes event search, start stop search and time search.
Event Search: click beside the Event List, then click
Select one event list and click beside Event List, then click
event video. Select another list and click
Start Stop Search: click beside S-S List, then click
Select one event list and click beside Event List, then click
video event. Select another list and click
Time Search: enter time in time search box, then click
date and time you enter as shown below.
31
), and the net
, the event list will display as below:
, and it will start to play this
again, and it will play the selected event video.
, start stop list will display as below:
, and it will start to play this
again, and it will play the selected event video.
, it will start to play video from the

8. Name Setup

When the cursor moves to Name Setup, please push the
window will appear, which is illustrated as below.
Each channel's name can contain a combination of up to eight characters. Push the
DOWN button to move the cursor and push the
wish to modify, then push the LEFT or RIGHT
or button to modify each character, and then push the -
DISPLAY: if set to " OFF ", the channel's name will not display on the screen.

9. Bright/Contrast Setup

When the cursor moves to Bri/Con Setup, please push enter button, the Bri/Con Setup
window will appear, which is illustrated as below.
BRI: picture brightness CON: picture contrast
Please push UP DOWN LEFT , , , and RIGHT
button to modify the value. When the setting changes are complete, press the
to save the changes and return to the previous menu.
Enter button, the Name Setup
UP or
ENTER button to select which channel you
button to select each character, then push
ENTER button to save this name.
buttons to move the cursor, push + and
MENU button
+
-
8