Factory Reset; Video Setup - Swann DVR4-Net Installation Manual

6. Factory Reset

When the cursor moves to Factory Reset, please push enter button, the confirmation window
will appear, which is illustrated as below.
If you select " YES " and push the enter button, all of the DVR settings will reset to default, if
you do not want to reset to the default settings, please select "

7. Video Setup

When the cursor moves to Video Setup, please push enter button, the Video Setup window
will appear, which is illustrated as below.
BOUNDARY: boundary line color
BACK GROUND: back ground color.
7
NO ".
Local Search operation: if the software is in local search mode (click
search window will display, it can play the video on HDD of you computer.
Click , select one video file, the click
HDD Scan: Connect the HDD that used in the DVR to a PC and then select HDD Scan, if
the software is in HDD scan mode (click
Click and Select one HDD, then click
HDD.
Local Record: click to start local record, it will record picture from Internet onto
local HDD of the computer, click again to stop recording.
Setting: click , setting window will display, you can change IP/Port and Video format of
the DVR, start and stop recording on DVR.
Quit: first you have to click , then click
), local
, it will play the video file
), local search window will display,
, it will scan all video information on the
to close the software.
32