Protocol Set; Buttons On The Front Panel; Recording/Playing Control Buttons Area - Swann DVR4-Net Installation Manual

9. Event Search
Move the cursor to Event Search , then push the
will appear, which is illustrated below.
There are four types of event list: MOTION ALARM SCH
MOTION means motion triggered alarm recording.
ALARM means external sensor triggered alarm recording.
SCH means scheduled time recording.
NETWORK means network activated recording.
Push the UP and DOWN button to move the cursor among the event list, push the
RIGHT button to see the Previous or
segment you have selected. Push the SEARCH
10. Start Stop Search
Move the cursor to Start Stop Search, push the
window will appear, which is illustrated below.
All recorded segments are displayed here, push the
cursor among the segment list then push the
Next page, push ENTER button to play the segment you select. Push the
again to return to the Search Play menu.
25
ENTER button, the event search window
, , and NETWORK .
Next page, and push the ENTER button to play the
button to return to the Search Play
ENTER button and the Start Stop Search
UP or DOWN button to move the
LEFT or RIGHT button to see Previous
SEARCH

18. Protocol Set

You must set the correct protocol so you can control the DVR with a Computer or Keyboard.
Move the cursor to
window will appear, which is illustrated below. Push the
cursor, and push " " or " " to change the value.
BAUDRATE:
PROTOCOL:
refer to appendix A. The default is PTC1.
LEFT or ADDRESS: The address of the DVR for the protocol, which can be changed from 0x00 to
0xff. The default is 0x01.
menu.

Buttons On the Front Panel

The front view of the video-recorder is illustrated as below, see over page for details of each
button's function.

1.Recording/Playing Control Buttons Area

or
button
Protocol Set , then push the ENTER
+ -
Can change form 2400bps to 38400bps.The default is 2400bps.
The protocol used by the computer or keyboard to control the DVR, please
button and the Protocol Setup
UP or DOWN button to move the
14