Usb Backup - Swann DVR8-NET-8000 User Manual

If you want to change the between the MASTER HDD and SLAVE HDD, press the mode button,
then press Enter button. Press the Menu button to exit.

10. USB Backup

If you want to use this function, the first step is to format USB device with "FAT" system on
your computer.
NOTE: the DVR doesn't support "FAT32" file system.
Plug in the USB device, go to the menu of Backup set, check whether the USB device was detected,
and there is enough free space of the USB device, select the backup mode, then completely exit the
menu system. USB backup is available only in playback mode.
If you selected "STILL" for the backup mode, press the USB button and an "S" will appear on the
screen. When it disappears, the backup of the picture is finished, and you can un-plug the USB
device out and see the picture on a computer with the net viewer software.
If you select "MOVIE" for the backup mode, press and hold the USB button until the "A" appears
on the screen, press the USB button again to select the end of the backup video. This may take a
little time, and make sure the USB device has enough free space, if the "A" disappears, the backup
is ok, and you can view the video on a computer with netviewer software.
NOTE: if you backup still picture, please choose full picture display.
We recommend using high quality USB thumb drives that we provide
8-Channel Digital Video Recorder
30