THOMSON TG580 Setup And User Manual page 37

Adding IGD Discovery and Control
Your Windows XP system is able to discover and control Internet Gateway Devices (IGD) like the Thomson
Gateway on your local network. Therefore, it is recommended to add the IGD Discovery and Control client to
your system.
Proceed as follows:
1 On the Windows taskbar, click Start.
2 Select (Settings >) Control Panel > Add or Remove Programs.
3 In the Add or Remove Programs window, click Add/Remove Windows Components.
4 The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5 The Networking Services window appears:
Select Internet Gateway Device Discovery and Control Client and click OK.
6 Click Next to start the installation and follow the instructions in the Windows Components Wizard.
You may need your Windows installation CD during the installation.
7 At the end of the procedure, the Wizard informs you that the installation was successful. Click Finish to
quit.
E-DOC-CTC-20090507-0002 v1.0
4 Thomson Gateway Tools
31