Preliminary Steps - THOMSON TG580 Setup And User Manual

Wireless-n multi-user adsl2+ gateway
Table of Contents

Advertisement

1
Installation
1.1

Preliminary Steps

DSL service
The DSL service must be up and running on your telephone line.
If both conventional telephone and DSL service are simultaneously available from the same copper pair, you
will need a central splitter or distributed filters for decoupling DSL and telephone signals.
Public telephone lines carry voltages that can cause electric shock. Only try to set up splitter/
filters that have been designed to be installed by unqualified personnel. For further assistance,
contact your Internet Service Provider.
Computer requirements
If you want to connect your computer using:
The Ethernet cable, make sure that the computer is equipped with an Ethernet Network Interface Card
(NIC).
A wireless connection, you will need a WiFi-certified wireless client adapter for each computer you want
to connect wirelessly.
Internet connection details
You may need the following connection details from your Internet Service Provider (ISP):
Your ISP's method for connecting to the Internet (for example PPPoE)
The VPI/VCI (for example 8/35)
Your user name and password to connect to the Internet for PPP connections
Your IP settings in case of static configurations
You may have received this information when you subscribed at your Internet Service Provider. You may be
prompted for this information at a given step in the installation procedure.
4
E-DOC-CTC-20090507-0002 v1.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents