Yamaha 2009 YW125Y Owner's Manual page 48

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
1
3
1. Oil filler cap
4
4. Install the engine oil drain bolt, and
then tighten it to the specified
5
torque.
6
7
8
9
1
1. Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m • kgf, 14.5 ft • lbf)
5. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
Recommended engine oil:
See page 8-1.
Oil change quantity:
0.85 L (0.90 US qt, 0.75 Imp.qt)
NOTICE
● ● ● ● ●
Do not use oils with a diesel
specification of "CD" or oils of a
higher quality than specified. In
addition, do not use oils labeled
"ENERGY CONSERVING II" or
higher.
● ● ● ● ●
Be sure no foreign material en-
ters the crankcase.
6-11 6-48
1. "CD" specification
2. "ENERGY CONSERVING II"
6. Start the engine, and then let it idle
ECA11670
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off and
check for the cause.
7. Turn the engine off, and then check
the oil level and correct it if neces-
sary.
EAU1722A
1
2