Getting started
Headset attachments
Behind the neck band
By default, the ear pad on the neck band is positioned to be
worn on the right ear.
To attach the headset to the neck band:
1.
Make sure there are no headset attachment, except the
earbud, connected to the headset.
2.
Insert the earpiece into the loop of the ear pad as shown in
Figure 9.
3.
Gently press the earpiece inward until it clicks into place as
shown in Figure 10.
4.
Place the neck band around your neck and over your ears.
5.
Adjust and rotate the angle of the headset until the microphone is
pointing towards your mouth as shown in Figure 11.
Figure 9
Figure 11
25
Figure 10