AT&T TL7800 User Manual page 32

Getting started
Headset attachments
To wear the headset on your left ear:
1. Remove the ear pad and supporting pad from the neck band
by carefully pulling them up through the stems at the end of
the neck band as shown in Figure 12.
Supporting pad
2. Snap the socket of the ear pad into the stem at the left end of the
neck band. Snap the socket of the supporting pad into the stem at
right end of the neck band as shown in Figure 13.
Follow Steps 1-5 in To attach the headset to the neck band on
3.
page 25.
Figure 12
Figure 13
26
Ear pad