Behind The Neck Band - AT&T Marathon User Manual

Getting started
Headset attachments

Behind the neck band

When first shipped, the ear pad of the neck band is positioned
to be worn on the right ear.
To wear the headset on your left ear:
1. Remove the ear pad from the neck band by carefully pulling
the stem of the ear pad up through the rectangular socket at
the end of the neck band, as shown in Figure 11.
Ear pad
2. Snap the stem of the ear pad into the rectangular socket at
the left end of the neck band.
To attach the neck band to the headset for wearing on the
left or right ear:
1. Remove any headset attachment currently connected to
the headset.
2. Insert the earpiece into the loop of the ear pad, as shown
in Figure 12.
3. Gently press the earpiece inward until it clicks into place, as
shown in Figure 13.
Figure 11
Figure 12
Figure 13
27