Figure 4.14 Disconnecting The Tp Button Ffc And Remove Four Screws; Touch Pad Bracket And Tp Button Board; Removing The Touch Pad Bracket And Tp Button Board - Toshiba Satellite Maintenance Manual

4 Replacement Procedures
4.7

Touch Pad Bracket and TP Button Board

Removing the Touch Pad Bracket and TP Button Board

Remove the Touch Pad Bracket and TP Button Board according to the following procedures and
Figures 4.14, and 4.15.
1. Pull out the TP button to motherboard FFC (the left one) from the logic upper assembly
and disconnect the TP button to touch pad FFC (the right one) from the touch pad, as
indicated in Figure 4.14. Remove four M2x4 screws, and then remove the touch pad
bracket and the TP button board.

Figure 4.14 Disconnecting the TP button FFC and remove four screws

Satellite/Satellite PRO T230D Maintenance Manual
M2×4*4
4-22