3. Tests and Diagnostics
3.14 3D G-sensor test
NOTE: please keep 90 degree between logic upper and LCD panel when test
The display of a test program and the set method of PC are shown below.
Display of a Test Program, The portion which PC and Test-Fixture contact is green.
Z
Upper
X
Set method of PC <1>
If the picture shows as below, it means the 3D G-sensor function is OK
Test 2 :
Rear
r
Uppe
°
90
Set method of PC <2>
Test 3:
Right
r
Uppe
°
90
Set Method of PC <3>
Test 4:
28
Satellite/Satellite PRO T230D Series Maintenance Manual