Step 3 Video Connections - Panasonic SC-RT30 Operating Instructions Manual

3
STEP
Included parts to be used
2 RF coaxial leads
(black)
Use the supplied RF coaxial leads
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit
to your TV and aerial outlet or aerial lead, as shown in connection types A–C.
≥ Keep the RF coaxial leads as far away as possible from other leads.
≥ Do not roll up the RF coaxial leads.
≥ Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
≥ Choose from one of the connection types A–C that suits your requirement.
A Connecting to a television only
Using a fully wired 21-pin Scart lead
≥ You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57).
≥ You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
[Required[setting]
"AV1 Output" in the Setup menu (➡ 51)
Use one of the RF coaxial lead (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial lead.
To the aerial
Connecting a terminal other than the 21-pin Scart terminal (➡ 15).
RQT8672
12
Video connections
1 RF coaxial lead
Television's rear panel
VHF/UHF
AV
RF IN
RF coaxial lead
(included, black)
2
AV1
(TV)
AV2
(EXT)
Back of this unit
(grey)
3
Fully wired 21-pin Scart lead
(not included)
§ This connection will enable you to play audio
from your television through your home
theater system. Refer to "Enjoying TV
broadcast with this unit's speakers" (➡ 56).
RF coaxial lead (included, grey)
1
or
RF coaxial lead (included, black)
1
This unit
§
(For Q Link functions)
3
This unit
RF
IN