Step 4 Video Connections - Panasonic SC-HT1000 Operation Manual

4
STEP Video connections
∑ RF lead
(K1TWACC00001)
Preparation
≥Turn the television off and disconnect its AC mains lead.
≥Refer to the television's or satellite receiver's operating instructions.
Do not connect the unit through a video cassette recorder
Video signals fed through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the television when the VCR is recording the copy
protected material.
Connections using 21-pin Scart leads (not supplied)
A
Satellite Receiver
(not supplied)
21-pin Scart socket (TV)
1
RF IN
2
RF OUT
3
AV1 (TV)
4
AV2 (DECODER/EXT)
5
14
RF Output socket
AV1 21-pin Scart socket
AV2 21-pin Scart socket
AM ANT FM ANT
A
OPTICAL
IN
OUT
R-AUDIO-L VIDEO S-VIDEO 75
EXT LOOP
LOOP
ANT
AC IN GND
R-AUDIO-L VIDEO S-VIDEO
AV4 IN
Main unit
21-pin Scart socket (DVD)
Connect the aerial to the RF Input socket of the
main unit.
Connect the RF lead from the RF Output socket of
the main unit to the television aerial input socket.
Connect the AV1 21-pin Scart socket to television
Scart socket.
≥This is necessary for Download from television with Q Link function.
≥If you wish to view pictures by RGB signals from this socket, connect this
unit to the appropriate Scart socket on your television.
≥If the television is equiped with a 21-pin Scart socket that features
Y/C signal separation, set the "AV1 output" to "S-Video" (
so that you can play back with high picture quality and use a fully-wired
21-pin Scart lead (not supllied) to connect the unit to the television.
Connect the AV2 21-pin Scart socket to Satellite
Receiver.
If you are not connecting a Satellite Receiver, skip this step.
Connect your Satellite Receiver to the television.
If you are not connecting a Satellite Receiver, skip this step.
∑ Video cable
(K2KA2CA00008)
∫
RF lead
This lead connects TV signal from the aerial to your television
while this unit is on or in standby.
∫
Choose one of the connection methods (
to suit your system.
RF Input socket
Aerial
(not supplied)
1
AV1 (TV)
RF IN
AV2 (DECODER/EXT)
RF OUT
Aerial Input
socket
2
RF lead
(supplied)
3
Necessary for
TV with Q Link
4
Necessary for connecting
a Satellite Receiver
page 53)
Television
[with or without Q Link function]
(not supplied)
AV2 socket
AV1 socket
5
Main unit
AM ANT FM ANT AV1 (TV)
A
OPTICAL
IN
OUT R-AUDIO-L VIDEO S-VIDEO
EXT LOOP 75
AV2 (DECODER/EXT)
LOOP
ANT
GND
AC IN
R-AUDIO-L VIDEO S-VIDEO
AV4 IN
AM ANT FM ANT AV1 (TV)
A OPTICAL
IN
OUT
R-AUDIO-L VIDEO S-VIDEO EXT LOOP 75
AV2 (DECODER/EXT)
LOOP
ANT
GND
AC IN
R-AUDIO-L VIDEO S-VIDEO
AV4 IN
AM ANT FM ANT AV1 (TV)
A
OPTICAL
IN
OUT R-AUDIO-L VIDEO S-VIDEO
EXT LOOP 75
AV2 (DECODER/EXT)
LOOP
ANT
GND
AC IN
R-AUDIO-L VIDEO S-VIDEO
AV4 IN
AM ANT FM ANT AV1 (TV)
A OPTICAL
IN
OUT
R-AUDIO-L VIDEO S-VIDEO EXT LOOP 75
AV2 (DECODER/EXT)
LOOP
ANT
GND
AC IN
AV4 IN R-AUDIO-L VIDEO S-VIDEO
Satellite Receiver
, or )
A B C
RF IN
RF OUT
Television
RF IN
RF OUT
RF IN
RF OUT
RF IN
RF OUT