View, Download and Print your Scanned Images
You can use multiple methods for viewing, downloading, editing or printing your scanned
images:
•
•
•
Co n n ec t to Sc an n er W i - Fi A c c e ss Po in t
(a)
(b)
(c)
(d-e)
Connect to Scanner Wi-Fi Access Point (refer to page 14)
Connect Scanner to Computer (refer to page 16)
Use Presto! PageManager Software (refer to page 18)
Using the scanner's Wi-Fi connection, you can wirelessly
connect to your private cloud to browse or download your
scanned pictures.
a.
Turn Wi-Fi mode on by sliding switch to
b.
Wait 40 seconds while the data is indexed and the Wi-Fi
ready countdown reaches 00 seconds.
c.
To connect your computer, iPhone, iPad or Android
device to the scanner, use the device's Wi-Fi settings to
select the scanner's network ID "Pandigital-XXXX" [last
four digits of Access Point's MAC address]".
PC users: Go to the Wi-Fi Network icon and select the
network ID (Pandigital-XXXX). No password is required;
wait for the connected status confirmation.
Mac users: Click the
bar and select the network ID (Pandigital-XXXX). No
password is required; wait for the connected status
confirmation. Make sure you are connected to only one
IP interface (either Wi-Fi or Ethernet port). The Client IP
would be 10.10.100.x range.
iPhone & iPad users: Go to
the network ID (Pandigital-XXXX). No password is
required; wait for the check mark to confirm the
connected status.
Android users: Go to
the network ID (Pandigital-XXXX). No password is
required; wait for the connected status confirmation.
d.
Open an Internet Explorer window.
PC users: Click
Explorer
to open an Internet browser.
Mac, iPhone & iPad users: Click or tap the
to launch a browser session.
Android users: Device setups vary, but generally you
can tap on an Internet browser icon on your Home
screen.
If you are not directed to Easy View automatically,
you must type in your default home page URL,
e.g.,
http://www.google.com
in http://10.10.100.1. This step will redirect you to
"Easy View" page.
14
Wi-Fi network
Settings
Settings
Wi-Fi Settings
→
Start
Program Files
→
or type
On
position.
icon on the menu
Wi-Fi
→
→
select
→
select
Internet
→
Safari
icon