Horizon Fitness EX-69 Owner's Manual page 13

EX-79 AssEmBLY STEp 2
HARdWARE fOR STEp 2:
FLAT WASHER (D)
16 mm
Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
EX-79 SHOWN
BOLTS (F)
SPRING WASHERS (E)
FLAT WASHERS (D)
INCLINE BRACKET
NUTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
SPRING WASHER (E) BOLT (F)
15 mm 20 mm
Qty: 4 Qty: 4
SPRING WASHER (I)
NUT (J)
18 mm
Qty: 4
Qty: 4
* This step is for EX-79 models only.
BOLT (G)
open hardware for step 2.
A
35 mm
Qty: 4
Attach the guide rail set to the
B
main frame using 4 bolts (g), 4
spring washers (e) and 4 flat
washers (d).
Attach the guide rail set to the
C
incline bracKet using 4 bolts (f),
4 flat washers (h) and 4 spring
washers (i) and 4 nuts (J).
noTE: You may need to pull the incline
bracket out of the main frame in order to
connect it to the guide rail set.
MAIN FRAME
BOLTS (G)
GUIDE RAIL SET
79
EX-
ONly
13