Toshiba e-studio 350 User Manual page 5

Turning Off the Power (Shutting Down)
When turning off the power of the equipment, perform the following shutdown procedure.
DO NOT turn off the power by switching off the power switch of the equipment as it can
cause the failure of the hard disk.
Before turning off the power, be sure that the following three conditions are satisfied:
No jobs are left in the printing job list.
The ERROR lamp is not blinking.
No PCs access the equipment via network.
1. Press the USER FUNCTIONS button on the control panel.
2. Press the USER button to enter the user setting menu,
and then press the SHUTDOWN button.
3. "Processing job will be deleted. Are you sure you
want to shutdown?" appears on the screen. Press the
YES button. (To cancel the shutdown operation, press
the NO button.)
4. "Shutdown in progress" appears on the screen, and
then the equipment is shut down. The power switch
automatically returns to the OFF position.
Page 3