Data-Transfer Mode; System Requirements - Konica Minolta Dimage X31 Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Details on using
and installing the DiMAGE Viewer software are found in the supplied software manual.
The DiMAGE manuals do not cover the basic operation of computers or their operating
systems; please refer to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
IBM PC / AT Compatible
Windows 98, 98SE, Me,
2000 Professional, and
XP(Home/Professional).
Check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the
included DiMAGE Viewer CD-ROM (p. 91). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE X
on the performance of older DiMAGE cameras.
Mac OS 9.0 ~ 9.2.2 and Mac OS X
with a computer. The new software will have no affect
31
Macintosh
10.1.3 - 10.1.5, 10.2.1 - 10.2.8,
and 10.3 - 10.3.3.
87