Exposure Compensation - Konica Minolta Dimage X31 Instruction Manual

EXPOSURE COMPENSATION

The camera exposure can be adjusted to make the final picture lighter or
darker by as much as ±2Ev in 1/3 increments with still image and movie
recording. When auto reset (P. 55) is active, exposure compensation is
Exp. comp.
reset to ±0 when the camera is turned off. Exposure compensation is set
in the main menu of the recording mode (p. 36) or the movie-recording mode (p. 61). The
exposure-compensation function can be assigned to the controller with controller
customization (P. 54).
The exposure compensation must be set before the image
is captured. When setting the exposure compensation, the
amount of compensation is shown next to the exposure-
compensation indicator on the monitor. When set to any
value other than 0.0, the exposure-compensation indicator
will be displayed on the LCD monitor as a warning.
Move the controller up and down to adjust the
exposure-compensation value.
The LCD monitor will display the exposure-compensation
indicator and the degree of compensation. The change in
exposure is visible in the live image.
47