Focus Signal; Shutter Signal; Auto Power Off - Konica Minolta Dimage X31 Instruction Manual
Hide thumbs
Also See for Dimage X31:
- Instruction manual (112 pages) ,
- Manual (112 pages) ,
- Instruction manual (4 pages)
Table of Contents
Advertisement
FOCUS SIGNAL
When the focus is confirmed, the focus signal will give a positive confirmation of the
operation. The focus signal can be turned off in section 2 of the setup menu (p. 78). Two
signals are available.
SHUTTER SIGNAL
When the shutter is released, a shutter signal will give a positive confirmation of the
operation. The signal can be turned off in section 2 of the setup menu (p. 78).
AUTO POWER OFF
To conserve battery power, the camera will shut down if an operation is not made within
a certain period. To restore power, press the main switch. The length of the auto-power-
off period can be changed in section 2 of the setup menu (p. 78): 1, 3, 5, 10, and 30
minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera
is connected to a computer.
85
Hide quick links:
Advertisement
Table of Contents
