Special Effects; Adding A Frame Or Border - Konica Minolta Dimage X31 Instruction Manual

SPECIAL EFFECTS

The special-effects option in the main menu adds frames and borders to
images or combines two images side by side. Required menu functions
should be set before selecting the special effects icon on the menu. Once
Special FX
the special-effects routine begins, menu functions cannot be changed
until the operation is completed. The continuous-advance and multi-frame drive modes
are temporarily set to single-frame advance.

Adding a frame or border

An image can be captured with a frame or border using the special-effects option in the
main recording menu (p. 36).
After the special effects icon is selected, a menu is
displayed with the special effects options. Move the
controller up and down to select the appropriate
option (1). As each option is highlighted, the
background frame or border changes accordingly.
Press the controller to select the highlighted option
(2).
Compose the subject within the frame or border.
Take the picture as described in the basic recording
section (p. 25).
Processing starts after the shutter releases. The
processing time depends on the image-quality
mode. When completed, the live image is displayed.
50 R -
ECORDING ADVANCED OPERATION
Frame 1 Frame 2 Border
1
Off
Frame
Frame
Border
2
Side by side
1
2