Basic Recording Operation - Konica Minolta Dimage X31 Instruction Manual

BASIC RECORDING OPERATION

Turn the camera on and slide the recording-mode switch to the recording
position.
Place the subject within the focus frame on the LCD monitor.
• T
1 Press the shutter-release button partway down (1) to lock the
focus and exposure.
• The focus signals (p. 27) on the monitor will confirm that the image
is in focus. If the monitor focus signal is red, the camera was
2
unable to focus on the subject. Repeat the previous steps until the
focus signal is white.
• If the battery power is very low, the LCD monitor turns off when
flash charges.
Press the shutter-release button all the way down (2) to take
the picture.
• After the shutter releases, the indicator lamp next to the card slot
will turn
memory card. Never remove a memory card while data is being
transferred.
• The image can be previewed after it is captured by continuing to
hold down the shutter-release button (p. 59).
he focus-lock function (p. 26) can be used with off-center
subjects.
red
and blink indicating image data is being written to the
25