File Number (#) Memory; Folder Name - Konica Minolta Dimage X31 Instruction Manual

Hide thumbs Also See for Dimage X31:
Table of Contents

Advertisement

FILE NUMBER (#) MEMORY

If file number memory is selected, when a new folder is created, the first file stored in the
folder will have a number one greater than the last file saved. If the file number memory
is disabled, the image file number will be 0001. File number memory is activated in
section 2 of the advanced recording menu (p. 52).
If file number memory is active and the memory card is changed, the first file saved to
the new card will have a number one greater than the last file saved on the previous card
if the new card does not contain an image with a greater file number. If it does, the file
number of the new image will be one greater than the greatest on the card.

FOLDER NAME

All recorded images are stored in folders on the memory card. Folder
names come in two formats, standard and date. Folder name format is
selected in section 2 of the advanced recording menu (p. 52).
100KM015
Standard folders have an eight character name. The initial folder is
(Standard)
named 100KM015. The first three digits are the folder's serial number,
which will increase by one each time a new folder is created. The next
two letters refer to Konica Minolta, and the last three numbers indicate
the camera used; 015 indicates a DiMAGE X
.
31
A date folder name also starts with the three digit serial number and is
10140915
followed by one register for the year, two registers for the month, and
(Date)
two registers for the day: 101YMMDD. The folder 10140915 was
created in 2004 on September 15th.
With the date folder format selected, when an image is recorded a new folder with the
day's date will be created. All images recorded that day will be placed in that folder.
Images recorded on a different day will be placed in a new folder with the corresponding
date. If the file number memory function is off, when a new folder is created, the serial
number in the image-file name is reset to 0001. If file number memory function is on, the
serial number in the image-file will be one greater than the last image saved. For more
information on folder organization and file names, see page 94.
58
R
-
ECORDING
ADVANCED OPERATION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents