Data-Transfer Mode; System Requirements - Konica Minolta DINAX MAXXUM 7D Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Details on using
and installing the DiMAGE Viewer software are found in the supplied software manual.
These manuals do not cover the basic operation of computers or their operating systems;
please refer to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP
Macintosh OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 ~ 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~ 10.3.5
Compatibility with Windows XP is with the home or professional editions only. Check the
Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the
included DiMAGE software CD-ROM (p. 122). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE software CD-ROM is required for
the operation of the this camera with a computer. The new software will have no affect
on the performance of DiMAGE cameras.
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-
ROM. This driver is not compatible with this camera.
120
D -
ATA TRANSFER MODE