Data-Transfer Mode; System Requirements - Konica Minolta DiMAGE Z2 Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Instructions on using and
installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE
manuals do not cover the basic operation of computers or their operating systems; please refer to
the manual supplied with your computer.

System requirements

For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. Both the computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The follow-
ing operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0–9.2.2 and Mac OS X 10.1.3–10.1.5, 10.2.1–10.2.8, 10.3–10.3.2.
Check the Minolta web site for the latest compatibility information:
North America:
Europe:
Users with Windows 98 or 98 second edition will need to install the driver software on the included
DiMAGE Viewer CD-ROM (p. 99). No special driver software is required for other Windows or
Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the Windows 98
driver software must repeat the installation procedure. The updated version of the driver software
included on the supplied DiMAGE Viewer CD-ROM is required for the operation of the DiMAGE Z2
with a computer. The new software will have no affect on the performance of older DiMAGE cam-
eras.
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-ROM. The dri-
ver is not compatible with this camera.
http://www.konicaminolta.us/
http://www.konicaminoltasupport.com
97